This 15dBi WiFi antenna is a powerful booster parabolic antenna that works best for point to point applications over a long distance. We found it provided a longer range signal than similar gain Yagi type antennas because has a narrower beam width (16° horizontal/21° vertical). This helps reduce or prevent interference from other neighborhood WiFi equipment. With permission it can be used as an directional extender to share an existing wireless service with a neighbor.
The antenna is made of precision cast aluminum alloy and is protected with a durable powder coat finish. The design presents has low wind resistance. The antenna works best with a clear line of sight, especially at long distances. Included: Stainless steel "U" bolts for pole mount with. Size: 11.8" x 15.75", assembly required. N Female connector. This antenna is part of our CC Vector Extended Long Range WiFi Repeater System, and recommended for our WiFi Bridge system and our other Custom WiFi systems.
Note: This antenna is an accessory and will not work without other gear.
| Manual | Size | |
|---|---|---|
 |
Point to Point Assembly Guide | 1.8 MB |
| What's in the Box | |
|---|---|
|
|
| General Specifications | |
|---|---|
| Frequency Range: | 2400-2483 MHz |
| Antenna Gain: | 15dBi |
| Polarization Type: | Horizontal or Vertical |
| VSWR: | <1.5 |
| Horizontal Beamwidth: | 16° |
| Vertical Beamwidth: | 21° |
| Front to Back Ratio: | >20dB |
| Connector Type: | N-Female |
| Input Impedance: | 50Ω |
| Directional: | Yes |
| Construction Materials: | Aluminum and Steel |
| Operating Temperature: | -40°F to 149°F |
| Mount Type: | Mounts to a Pole (not included) |
| Diameter of Pole Needed: | 1.25" ~ 2" |
| Rated Wind Velocity: | 85 MPH |
| Antenna Dimensions: | 15.75" W x 11.8" H |
| Antenna Weight: | 3.3 lbs |
| Warranty: | 1-Year Limited |
|
Note: Specifications are subject to change without notice.
|
|
